Lutron GRX GRAFIK Eye 3000 Series

4 Scenes and 2, 3, 4, or 6 Zones, expandable to 16 scenes and 48 zones.

Available in White, Ivory, Beige, Brown, Black, Gray
Cover: Opaque to match base (A), or translucent black (T)


*Can link up to 8 GRAFIK Eye Control Units (8 addresses) for up to 48 zones
*Up to 16 Accessory Controls for total of 24 control points
*Built-in Infrared Receiver/Optional Infrared Wireless Remote Control
*Can increase individual zone capacities to 30,000 W/VA at 120V/277V
*Power Interfaces are necessary for Fluorescent (GRX-FDBI) and Electronic Low Voltage (GRX-ELVI). Power Interfaces are not required with HP 2-4-6 Dimming Module.
GRX-TVI Provides a 0-10V output that conforms to BSI 929.
Can be used to switch all lighting loads, including metal halide and electronic ballasts. If switching other non-lighting loads, use a relay by others.
**Note: System requires interface at 230V.

Click Here for More Information on the Graphik Eye System

			TOTAL WATTS / VA
GRAFIK Eye Model No.	No. of Zones	Wallbox Size in Gangs*	120V	100V (-JA)	220-240V (-AU)	230V-CE (-CE)
GRX-3102- GRX-3502-	2	2	1200	1000	1600	1600
GRX-3103- GRX-3503-	3	3	1500	1250	2400	2300
GRX-3104- GRX-3504-	4	4	2000	1600	3000	2300
GRX-3106- GRX-3506-	6	4	2000	1600	3000	2300
Global Product Offerings
Volts	Zone Capacity
120 V	6.7 A / 800W / VA
100V	6.0 A / 600W / VA
220-240V	5.0A / 1200W / VA
230V	3.4A / 800W / VA
* Mount in standard multiple gang wallbox, 2.75" deep minimum, 3.5" deep recommended. 1) No. SB-4G required. CE requires SB-4G (4 gang) wallbox.
Sources: Incandescent, magnetic and electronic low-voltage, neon/cold cathode, fluorescent (with Lutron dimming ballasts), switched loads. Power Failure Memory: Lights automatically return to prior levels: scenes and fade times are saved. Input Power: 50/60 Hz from conventional utility systems. Consult Lutron if power is from a generator.

Questions about ordering the the Lutron GRAFIK Eye?
Give us a call on our toll free # 1-800-839-9001.